Protect the area of the car that takes the most abuse! Quality features you'll find in every Covercraft mask:
Protective air intake screens
are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface.
Covered aluminum tabs
allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature.
Reinforced air foils
prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks.
We use a micro-perforated finish
on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly.
Our heavy-gauge leather grain vinyl
has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask.
Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.